Search results for "Membrane bioreactors"

Bacterial community structure and removal performances in IFAS-MBRs: A pilot plant case study

2017

Abstract The paper reports the results of an experimental campaign carried out on a University of Cape Town (UCT) integrated fixed-film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant. The pilot plant was analysed in terms of chemical oxygen demand (COD) and nutrients removal, kinetic/stoichiometric parameters, membrane fouling and sludge dewaterability. Moreover, the cultivable bacterial community structure was also analysed. The pilot plant showed excellent COD removal efficiency throughout experiments, with average value higher than 98%, despite the slight variations of the influent wastewater. The achieved nitrification efficiency was close to 98% for most of the experimen…

Bacterial Community Structure of an IFAS-MBRs Wastewater Treatment Plant

2017

TIn this work, the bacterial community putatively involved in BNR events of a UCT-MBMBR pilot plant was elucidated by both culture-dependent and metagenomics DNA analyses. The presence of bacterial isolates belonging to Bacillus (in the anoxic compartment) and to Acinetobacter, Stenotrophomonas, Rhodococcus, Escherichia and Aeromonas (in the aerobic compartment) is in agreement with the nitrification/denitrification processes observed in the plant. Moreover, the study of bacterial community structure by NGS revealed a microbial diversity suggesting a biochemical complexity which can be further explored and exploited to improve UCT-MBMBR plant performance.

Global sensitivity analysis of a filtration model for submerged anaerobic membrane bioreactors (AnMBR)

2014

The results of a global sensitivity analysis of a filtration model for submerged anaerobic MBRs (AnMBRs) are assessed in this paper. This study aimed to (1) identify the less- (or non-) influential factors of the model in order to facilitate model calibration and (2) validate the modelling approach (i.e. to determine the need for each of the proposed factors to be included in the model). The sensitivity analysis was conducted using a revised version of the Morris screening method. The dynamic simulations were conducted using long-term data obtained from an AnMBR plant fitted with industrial-scale hollow-fibre membranes. Of the 14 factors in the model, six were identified as influential, i.e…

Sensitivity and uncertainty analysis of an integrated membrane bioreactor model

2015

Sensitivity and uncertainty analysis, although can be of primarily importance in mathematical modelling approaches, are scarcely applied in the field of membrane bioreactor (MBR). An integrated mathematical model for MBR is applied with the final aim to pin down sources of uncertainty in MBR modelling. The uncertainty analysis has been performed combining global sensitivity analysis (GSA) with the generalized likelihood uncertainty estimation (GLUE). The model and methodology were applied to a University Cape Town pilot plant. Results show that the complexity of the modelled processes and the propagation effect from the influent to the effluent increase the uncertainty of the model predicti…

Greenhouse gases from sequential batch membrane bioreactors: A pilot plant case study

2016

Abstract The paper reports the results of nitrous oxide (N 2 O) emissions from aerobic and anoxic tank of a Sequential Batch Membrane Bioreactor (SB-MBR) pilot plant. The influence of salinity variation on N 2 O emission was analyzed by gradually increasing the inlet salt concentration from 0 to 10 g NaCl L −1 . The observed results showed that the N 2 O concentration of the gaseous samples was strongly influenced by the salt concentration. This result was likely related to a worsening of the nitrification activity due to the effect of salinity on autotrophic bacteria. Dissolved oxygen concentration and salinity were found to be the key factors affecting N 2 O concentration in the gaseous s…

Wastewater treatment and reclamation : A review of pulp and paper industry practices and opportunities

2016

The pulp and paper (P&P) industry worldwide has achieved substantial progress in treating both process water and wastewater, thus limiting the discharge of pollutants to receiving waters. This review covers a variety of wastewater treatment methods, which provide P&P companies with cost-effective ways to limit the release of biological or chemical oxygen demand, toxicity, solids, color, and other indicators of pollutant load. Conventional wastewater treatment systems, often comprising primary clarification followed by activated sludge processes, have been widely implemented in the P&P industry. Higher levels of pollutant removal can be achieved by supplementary treatments, which…

Biological minimization of excess sludge in a membrane bioreactor: Effect of plant configuration on sludge production, nutrient removal efficiency an…

Model-based automatic tuning of a filtration control system for submerged anaerobic membrane bioreactors (AnMBR)

2014

This paper describes a model-based method to optimise filtration in submerged AnMBRs. The method is applied to an advanced knowledge-based control system and considers three statistical methods: (1) sensitivity analysis (Morris screening method) to identify an input subset for the advanced controller; (2) Monte Carlo method (trajectory-based random sampling) to find suitable initial values for the control inputs; and (3) optimisation algorithm (performing as a supervisory controller) to re-calibrate these control inputs in order to minimise plant operating costs. The model-based supervisory controller proposed allowed filtration to be optimised with low computational demands (about 5min). E…

Greenhouse gases from membrane bioreactors: New perspectives on monitoring and mathematical modeling

2020

Abstract The awareness that the wastewater sector represents a significant source of greenhouse gas emission has increased, and is the awareness is evident based on the numerous research papers published in technical literature in the last 10 years. This chapter is aimed at providing a timely overview on greenhouse gas production and emission from membrane bioreactors. Specifically, this chapter dedicates particular attention to nitrous oxide (N2O), considering both experimental and mathematical modeling approaches. Referring to the experimental data, the observed results highlighted the significant contribution of the aerated compartments toward nitrous oxide emission as well as the import…

Nitrous oxide emissions in a membrane bioreactor treating saline wastewater contaminated by hydrocarbons

2016

The joint effect of wastewater salinity and hydrocarbons on nitrous oxide emission was investigated. The membrane bioreactor pilot plant was operated with two phases: i. biomass acclimation by increasing salinity from 10 gNaCl L−1 to 20 gNaCl L−1 (Phase I); ii. hydrocarbons dosing at 20 mg L−1 with a constant salt concentration of 20 gNaCl L−1 (Phase II). The Phase I revealed a relationship between nitrous oxide emissions and salinity. During the end of the Phase I, the activity of nitrifiers started to recover, indicating a partial acclimatization. During the Phase II, the hydrocarbon shock induced a temporary inhibition of the biomass with the suppression of nitrous oxide emissions. The r…